By integrating the driver into the cassette itself, we were able to eliminate approximately 12mm of unused space between the cassette and the hub flange, creating a near-dishless wheel that’s stronger than competitor wheelsets by a longshot.
*Note: Our 7 Speed Cassette works with 10 and 11 speed chains from both Shimano™ and SRAM™.
Offering 233% range and at only 180 grams, this cassette is a factory replacement for all LG1 wheelsets that have the integrated 7 speed cassette. The 21t cogs is made of aluminum, while the last 6 cogs are machined from a single piece of steel. Our industry exclusive 9t cog allows for more range without just making the biggest cog bigger. It also means you can run a smaller chainring than with competitor cassettes, allowing for greater ground clearance.
Only compatible with e*thirteen LG1 7 speed specific Downhill hubs.
Our 7 Speed Cassette works with 10 and 11 speed chains from both Shimano™ and SRAM™
6 Degree Engagement
The only way to eliminate the typically unused space between the cassette and the hub flange was to combine the freehub and the cassette into one piece. The 21t gear of the cassette is aluminum and contains the freehub, while the last 6 cogs machined from a single steel piece.
Cassette/Driver with Pawls and Springs, Dust Seal and Grease Packet
EXA+ Alloy (21 tooth cog) and Heat-Treated Cromoly Steel (9-18 tooth cogs)